FloPlast ‘Supreme’ range offers everything you could ask of a compression MDPE water fitting. They are suitable for use below ground on cold water services with polyethylene pipes manufactured in accordance with the requirements of BS EN 12201 – 2 : 2011 (BLUE).
Features of MDPE blue pipe and blue Water Pipe Fittings
- High Impact resistant Body and Nut which enables it to absorb thermal and mechanical stress.
- The fittings have a co-polymer polypropylene Body, Body Nut and Guide Ring, Acetal Grab Ring and Nitrile Seal.
- Excellent pressure resistance, tested to 48 Bars. Our MDPE Water system comfortably exceeds the performance requirements of UK Water Bye-laws Scheme. Tested and approved by various testing institutes worldwide. Water Regulations Advisory Scheme Approved (WRAS) product. (20mm to 110mm range of MDPE Water fittings)
- Our MDPE Water system is simple and quick to connect: To fit the pipe you don’t need to dismantle the connector, you don’t need to chamfer the pipe, you won’t lose any pieces on the job site, no time wasted; just cut the pipe, insert, pipe liner, lubricate the seal, undo the nut a few turns, push the pipe in as far as it will go, tighten the nut and it’s done!
